Top right corner of the page Maks' link takes you to allows you to select your language.
Gabej G10T
- Thread starter winston-smoker
- Start date
- Status
Top right corner of the page Maks' link takes you to allows you to select your language.
winston-smoker
Well-Known Member
Can't possibly be the Gabej G10T; it's not among any of the machines on the website of the link you provided.
Is your machine the manual 160 V2 or the electric 160 V2?
About electrical current: I imagine the voltage of yours must be 220V/50 Hz., not 110V/60 Hz. Here in North America, we use 110V/60 Hz. So an electric shredder manufactured in Poland would have a plug incompatible with our outlets, and would therefore require a voltage converter.
jekylnz
Well-Known Member
Heres a .8mm cut cheapo for $15-16 euro..that could easily be made better and electric
http://tobaccoandmachines.com/
http://tobaccoandmachines.com/
winston-smoker
Well-Known Member
Todd,
I've seen those before (the cheapest one). Not interested. If I were to get a shredder at all, it would be a tabletop, not something that has to be clamped. However, thanks for the link.
I've seen those before (the cheapest one). Not interested. If I were to get a shredder at all, it would be a tabletop, not something that has to be clamped. However, thanks for the link.
jekylnz
Well-Known Member
Yeah Personally I would create a better table mount for it & add motor
Brown Thumb
Well-Known Member
I looked at them last year. For something like a powermatic was approx 2 grand. If I did the conversion right. I am going on memory which I am lacking.
Boboro
Well-Known Member
If you cant afford a Powermatic the pasta machines will do a good job. They are very case sensitive. and Id buy one from the folks that sells new rakes. Getting use to the feel of proper case is a little tricky. Wet spots is what I had a lot of problems with.
jekylnz
Well-Known Member
Which one did you buy max? And how much usd would it have been?
winston-smoker
Well-Known Member
If you mean the T180, which seems much like a Powermatic, then I think you put the decimal point in the wrong place. Its price of 180 euros converts to about U.S. $235. But once you add the cost of shipping, and a voltage converter, and it would then be about the cost of a Powermatic.
Brown Thumb
Well-Known Member
I just checked and it around 2000 usd. here is a post from the seller but it is old.
http://forum4.aimoo.com/TheTobaccoG...180-cutting-machine-from-Poland-1-689360.html
winston-smoker
Well-Known Member
What a rip-off! I sincerely hope nobody bought it from that "seller" (what I should really call the seller I can't say on a public forum ). The manufacturer is actually selling it for 175 euros (not 180), which is about $235, depending on the exchange rate of the day.
It was listed on one of those Brand X tobacco forums. I feel a lot safer with the outlaws and renegades I already know on this forum... 
The T160 sells for 175 euro, the et160 sells for 500 euro and the et180 sells for 1150 to 1300 euro. I also tried one of the m10 and it was of very poor quality. I don't think I even got a pound of leaf thru it before it bit the dust. I could have returned it for a new shredder but the shipping was about what the shredder cost. Here is a link for the et180 http://www.alibaba.com/product-tp/143507459/professional_electric_cutting_machine.html http://www.4allsmokers.com/en/tobac...-leaves-cutting-machine-trezo-180-hv-1mm.html. I hope this helps here is a link for the gabej shredders http://www.alibaba.com/trade/search?fsb=y&IndexArea=product_en&CatId=&SearchText=gabej+tobacco
Last edited:
Brown Thumb
Well-Known Member
Post 23. Click link then electric t180 electric 1450E about 2 grand usd.
It was listed on one of those Brand X tobacco forums. I feel a lot safer with the outlaws and renegades I already know on this forum...
The forum is ok it just never did take off .
There is several members there that hang around here and HTGT .
winston-smoker
Well-Known Member
I must stand corrected. I just checked the manufacturers website for the price of the T180. It is 5000 Polish zloty, which converts to U.S. $1600. I must have seen the T160, priced at 175 euros, and thought that it was the T180. My apologies for this mistake. In any case, the voltage is definitely 220V, which would be incompatible with North American electrical outlets. This "discovery" is starting to make the Powermatic S look like a bargain!
Boboro
Well-Known Member
For the U.S. market its the best choice. Take a good look at thar elc. tube stuffer Too.
winston-smoker
Well-Known Member
I've concluded that you are right about the shredder. About the injector, I'm happy with my Zen SS, and it's still going strong, so I'm not even thinking of a new injector yet.
Boboro
Well-Known Member
I do need to take a nutter look at my Zen. I may have been tryin to packim to tite.
- Status