MarcL
Well-Known Member
I did and liked using a humidifier when I could keep it contained in this.Just curious as to what you guys use to keep your humidity up at your rolling station.
Show us your Rolling Station
Well, yesterday I had a few errands to run then somehow I ended up at Menards and got to walking around then out of nowhere...I had a buggy full of 3/4" poplar ,wood glue and stain ,Spax screws, round top decorative wood plugs (to fill a few screw holes that will be seen )and a 2 inch chinese...
The one I use is old and has really nice controls. (pic can be had by request) I'll use is only if i can commit solid time but still will through a cover over it if I walk away for any time.
Show us your Rolling Station
The slatted wood tray and the dividers are both from a La Flor Dominicana Factory Press IV box. What sits between them are two of ten shelves that go to a drier box for cigars.
Otherwise, in open larger space I do not like to use it. I will most of the time, use two of these tubs.


One with filler and the other with binder and wrapper because of the case difference.
They have been prepped by sort, type, unwrinkled/crinkled, de-stemmed and divided. The case is higher because the room is dry and I want the leaf to dry as I'm work it. The board will be kept damp. lesser so when binding then when wrapping though.
At times, the additional prep will be divided by each cigar instead to lesson tub open time.
So yes, they are kept closed in between working so I can walk away and come back to it. .. if I get a call in the middle of something, open it and slide the work in and close it. come back or not.
